Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Redlands, CA | Toolbox Contractors
We provide independent Mr-Glass shower enclosure and glass construction service across Redlands, including the 92373, 92374, and 92375 ZIP codes. The one thing that separates our Mr-Glass work here from a standard glass installer is that we understand Redlands’ older homes rarely give you a plumb wall or a level floor to hang an enclosure on, and we plan for it before the first panel comes off the truck. If you’re dealing with a sagging frameless door, a dragging slider, or a shower enclosure that’s never sealed right since the day it was installed, call us at (855) 382-3257 and we’ll walk the site, tell you what’s actually wrong, and quote the fix.
Written by Norm Castellano, Owner at Toolbox Contractors, serving Redlands and the Inland Empire.
Why Redlands Residents Choose Us for Mr-Glass Service
Most glass companies in Redlands will show up, take measurements, and bolt an enclosure to whatever’s there. Our approach is different because our background is in the framing and structure behind the glass. Norm Castellano grew up in the Muscoy area just northwest of San Bernardino, spent time in San Bernardino Valley College’s construction technology program, and worked residential framing, roofing, and full kitchen gut-and-rebuilds across the Inland Empire before running Toolbox Contractors. When a Mr-Glass enclosure fails in Redlands, it’s usually not the glass. It’s the crooked jamb, the settled pier-and-beam floor, or the original 1900s framing that was never squared. We fix the root cause, then we hang the enclosure so it actually swings, seals, and drains.
We also buy Mr-Glass panels and hardware directly and install to the manufacturer’s framing tolerances. That means OEM hinges, rollers, sweeps, and channels when the line is still in production, and quality aftermarket hardware only for discontinued models. You get a single accountable contractor for the full scope, from the tile and fixtures to the glass itself.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Redlands
These are the failures we see again and again in Redlands homes, most of them tied directly to the age and movement of the housing stock here:
- Frameless door sag at the hinge plate. Redlands has a lot of late-1800s and early-1900s homes with pier-and-beam foundations that settle unevenly over decades. The Mr-Glass frameless hinged door starts dragging its sweep, and the homeowner assumes the hinges failed. Usually the glass is fine; the out-of-level subfloor and out-of-plumb jamb are not. We re-shim and square the opening, then re-hang with OEM hinges.
- Roller and track wear on sliding enclosures. Mr-Glass frameless sliding shower doors take a beating in Redlands’ hot inland summers. The dry heat bakes the track rollers, and grit from Santa Ana wind events fouls the mechanism. Doors start grabbing mid-track or popping off the rail. We replace rollers and realign the track so the door glides instead of grinding.
- Silicone and sweep failure at the wall junction. Craftsman and Victorian bathrooms in Redlands shift seasonally as the ground expands and contracts. The silicone bead at the wall-to-glass junction fails, water tracks behind the panel, and the drywall or plaster starts wicking moisture. We demo the failed seal, treat any damage, and reset the panel with fresh sweep and silicone.
- Tempered-glass edge chipping. When an enclosure was set against original framing that wasn’t squared first, the glass panel sits under constant stress at the edge. Redlands’ older homes are full of these. A chipped edge on tempered glass means the panel has lost its integrity and we recommend replacement, not repair.
- Undersized neo-angle kits in tight alcoves. Mr-Glass Neo-Angle and corner-entry kits are popular in Redlands’ smaller mid-century bathrooms, but if the alcove was never checked for square, the kit goes in tight and the door binds on the curb. We measure, correct the opening, and set the kit so it operates clean.
Mr-Glass Service in Redlands: What Local Conditions Mean for Your Equipment
Redlands’ hillside and canyon-edge properties fall in fire-severity zones where defensible-space and construction-detail review is strict. That matters for Mr-Glass work in a way most people don’t see coming: if your bathroom remodel touches an exterior wall, or if you’re adding a vent through a fire-rated assembly, plan review can stop the project before the glass ever goes in. The city wants the fire-hardened wall and framing details approved first. So we sequence Mr-Glass enclosure measurements only after those details pass review, not before. In practice, a homeowner near Sunset Drive or along the canyon-edge neighborhoods might be told by a standard glass shop that they can come template tomorrow. We’ll tell you the enclosure work has to wait for the approved assembly, because if we hang glass on an unapproved wall, you’ll be pulling it back off. That’s the Redlands-specific reality we plan around.
Mr-Glass Models & Products We Service in Redlands
We install, repair, and replace across the entire Mr-Glass product range: the Semi-Frameless Shower Enclosure series in 3/8″ and 1/2″ glass, the Frameless Sliding Shower Door lines, the Frameless Hinged and Pivot Shower Door series, and the Neo-Angle and corner-entry enclosure kits. If your line is still in production, we use Mr-Glass OEM hinges, rollers, sweeps, and channel. If it’s discontinued, we spec quality aftermarket hardware and tell you before we order anything. For Redlands turnaround, we keep common sweeps, rollers, and seals on hand so a hardware-only repair doesn’t sit waiting on a freight shipment. When the glass itself is sound and only the moving hardware has worn, we re-hinge and re-seal rather than push a full replacement. But if tempered glass is chipped at an edge or the panel has lost its seal, replacement is the honest call and we’ll say so directly.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Redlands
Mr-Glass shower work in Redlands varies with the scope. A roller replacement or re-seal is a small job; a full walk-in shower rebuild with a frameless enclosure is a real remodel. Here’s what you’re looking at for the common scopes:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the price is the condition of the walls and floor behind the glass. A square, plumb opening is a fast install. A settled pier-and-beam bathroom in an older Redlands home takes more correction before the enclosure goes in. Every estimate is free and it includes a line-item scope. Call (855) 382-3257 to schedule one.
Serving Redlands, CA — Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Redlands
Yes, but only if the opening is corrected first. We re-shim, square the framing, and set the tile before we template the Mr-Glass enclosure. Hanging frameless glass on an out-of-square jamb is how you get a door that sags at the hinge in six months. Call (855) 382-3257 and we’ll tell you what your specific bathroom needs.
It can. If the remodel touches an exterior wall or adds a vent through a fire-rated assembly, the fire-hardened detail has to pass plan review before the enclosure measurement should happen. We sequence the work that way so you don’t end up pulling glass off an unapproved wall. Call (855) 382-3257 for an exact scope review.
Repair is usually the right call. We replace the Mr-Glass OEM rollers, clean and realign the track, and if the glass and frame are sound, the door glides again for a fraction of a full replacement. If the glass is chipped at an edge, replacement becomes the honest recommendation. Call (855) 382-3257 and we’ll assess it.
No. We’re an independent contractor that buys Mr-Glass panels and hardware directly and installs to the manufacturer’s framing tolerances. We’re not manufacturer-affiliated or authorized, and we’ll tell you plainly if a damaged wall, not the glass, is your actual problem.
We measure the alcove first. If it’s undersized for a standard Mr-Glass kit, we reframe the opening before the enclosure is ordered or templated. Trying to force a kit into a tight alcove is how you get a door that binds on the curb. Call (855) 382-3257 and we’ll measure it for free.
Service Areas Near Redlands
We cover Redlands and the surrounding cities, including San Bernardino, Loma Linda, Colton, Highland, and Rialto. If you’re in one of those areas and need a Mr-Glass enclosure repaired or a full shower remodel, we’re close. Our Redlands service area page shows the full reach. For Mr-Glass work specifically in the neighboring cities, see our Mr-Glass service in Fontana and Mr-Glass service in Crestline pages. You can also read about our broader Mr-Glass sales & service work.
Book Your Mr-Glass Service in Redlands Today
If your Mr-Glass enclosure is sagging, dragging, or leaking, the fix starts with a phone call. We’ll walk the site, tell you what’s actually wrong, and quote the work in writing. Call (855) 382-3257 to schedule your free estimate in Redlands.
Written by Norm Castellano, Owner at Toolbox Contractors, serving Redlands and the Inland Empire.