Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Redwood City, CA | Toolbox Contractors
We install, repair, and replace Mr-Glass shower enclosures, mirrors, and interior glass across Redwood City, from the postwar ranches in 94061 to the hillside customs above 94062. The one thing that separates our Mr-Glass work here is templating against as-built walls on infill remodels, not the plan set, because nearly every Redwood City job involves walls another trade opened up before we ever put a tape measure to them. Our crew works directly with the brand’s frameless hinged enclosures, sliding tub doors, and fixed glass partitions. Call (855) 382-3257 for a free estimate. For broader service context, see our Mr-Glass sales & service page.
Why Redwood City Residents Choose Us for Mr-Glass Service
We’ve handled Home Remodeling – Redwood City projects with Mr-Glass product lines long enough to know which profiles bind on a shifting jamb and which bottom tracks hold water through a wet Peninsula winter. Norm Castellano runs the crew, and he grew up around houses that were always mid-project. That background matters here. Redwood City’s housing stock isn’t uniform: a 1950s ranch off El Camino moves differently than a 1980s hillside custom, and a downtown Victorian has its own set of surprises behind the plaster. We carry OEM Mr-Glass hinges, rollers, and seals where they’re still available for a given profile, and we stock quality aftermarket hardware for older enclosures where the factory parts have been discontinued. We’re an independent contractor, not an authorized Mr-Glass dealer, so when we tell you to re-hang the existing glass instead of replacing it, that’s the honest answer, not a lost sale.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Redwood City
- Out-of-plumb walls on postwar ranches. The 1940s-60s stucco-over-wood-frame homes in 94061 and 94063 sit on clay that expands and contracts with seasonal moisture. A frameless Mr-Glass enclosure hinged to a jamb that has shifted a quarter inch will bind within a year or two. We re-plumb the curb, reset the hinges, and shim the panel so the door actually latches.
- Cloudy glass from hard Peninsula water. Redwood City’s mineral content etches Mr-Glass panels over time, and it pits the hinges and rollers long before the glass itself fails structurally. We can assess whether the clouding is surface etching you can live with or deep mineral damage that warrants a new templated panel.
- Bottom-track rot from winter intrusion. When a stall’s curb or wall flashing leaks during the October-April rain window, water sits under the track, corrodes the fasteners, and grows mildew behind the frame. This is the most common repair call we get from owners of older Mr-Glass tub/shower doors.
- Racked panels on hillside customs. In the graded-lot homes of 94062 and 94065, floor level shifts from settled footings throw a previously square enclosure out of level. The panel racks and the seals weep. We reset the glass to the new as-built level rather than fighting the old measurements.
- Broken rollers on bypass tracks. Sliding Mr-Glass tub/shower doors fail at the rollers and guides first. If the track is still sound, we replace the hardware and re-hang the door. If the track has corroded, we’ll tell you plainly whether a new enclosure is the better money.
Mr-Glass Service in Redwood City: What Local Conditions Mean for Your Equipment
The biggest difference between Mr-Glass work in Redwood City and Mr-Glass in West Menlo Park is access and sequencing. On the flat, small-lot blocks near downtown and the El Camino corridor, contractors routinely crane or hand-carry materials through a single shared driveway, because there is no rear alley and no room for a truck. That means a 3/8-inch tempered glass panel for a frameless enclosure often gets walked in by hand, templated against walls that the framer opened up and the tile setter already finished. In Redwood City, the enclosure is nearly always the last item measured. You can’t order a Mr-Glass panel off the plan set when the curb was re-poured three inches out from where the drawings said it would be. We’ve done this on a gut-and-rebuild ADU off a narrow shared driveway near downtown Redwood City: we templated a Mr-Glass frameless enclosure against walls that were no longer square after the framer opened up the bath, and hand-carried every panel in because no truck could reach the rear lot. Re-plumbed the curb, reset new OEM hinges and seals, and the door has swung clean through two rainy seasons since. That’s the Redwood City job in one paragraph. Pull permits that trigger neighborhood noticing and design review, and the glass still has to fit what was actually built.
Mr-Glass Models & Products We Service in Redwood City
Our crew works on Mr-Glass frameless hinged shower enclosures in 3/8-inch tempered glass, sliding glass tub and shower doors with bypass track systems, custom-cut mirror and wall glass panels, and fixed glass shower partitions and walk-in panels. We use OEM Mr-Glass hardware where the profile still supports it. Where factory hinges, rollers, and seals have been discontinued, we match with aftermarket hardware that carries the same load rating and finish. For faster Redwood City turnaround, our vans stock common roller sizes, hinge bushings, and gasket profiles so most sliding-door repairs don’t wait on a parts order. Frameless work is always measured on site, never ordered blind. If you’re planning a tub-to-shower conversion, we walk you through which Mr-Glass product lines fit the opening and which ones need a custom template.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Redwood City
Most Mr-Glass work in Redwood City falls into a few clear categories, and the price depends more on the condition of the opening than the glass itself.
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
What actually drives the number is whether the existing curb and wall framing are square, whether we’re re-using the existing glass or ordering a new templated panel, and whether the old bottom track has rotted out the subfloor. A free estimate means we come to the house, put a level and a tape on the actual surfaces, and give you a written line-item price. Call (855) 382-3257 to schedule one.
Serving Redwood City, CA — Our Local Coverage Area
We’re a General Contractor in Redwood City and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Redwood City
Yes. We shim, re-plumb, or re-pour the curb so the glass hangs plumb even when the surrounding wall is out by half an inch or more. We measure against the as-built surface, not the original framing. Call (855) 382-3257 and we’ll tell you what your specific walls will actually need.
The clouding is mineral etching from hard Peninsula water. Redwood City’s mineral content deposits on the glass, and over time it bonds at a microscopic level. Surface clouding can sometimes be cleaned; deep etching can’t be polished out. We’ll tell you which one you have and whether re-glazing or a new panel makes sense. Call (855) 382-3257 for an honest read.
It’s usually the wall. Postwar ranches in 94061 and 94063 shift with seasonal clay moisture, and a hinge that was square at install binds once the jamb moves a quarter inch. We check the hinge first, but most binding doors we see in Redwood City are a wall-plumb problem, not a hardware problem. Call (855) 382-3257 and we’ll diagnose it on site.
If we’re moving drain lines or changing the plumbing rough-in, yes, that triggers a Redwood City building permit. A straight tub-to-shower swap with no plumbing changes may not. We handle the permitting when it’s needed and tell you upfront on the estimate. Call (855) 382-3257 and we’ll check your specific scope.
Yes. The enclosure is measured last, after tile, curb, and waterproofing are done. On Redwood City infill remodels, measuring early means ordering a panel that won’t fit. We sequence our Mr-Glass templating around your other trades so the glass is ordered against what was actually built. Call (855) 382-3257 to talk through the schedule.
Service Areas Near Redwood City
We run Mr-Glass service across the Peninsula, and the same crew that works Redwood City also covers Redwood City service area neighborhoods in 94061, 94063, 94064, and 94065. If you’re in Mr-Glass service in Emerald Lake Hills or Mr-Glass service in San Carlos, the scheduling works the same way: free estimate, written line-item price, glass measured against the actual walls.
Book Your Mr-Glass Service in Redwood City Today
Tell me what you’ve got and I’ll tell you what it actually needs. If your Mr-Glass enclosure is binding, cloudy, leaking, or just measured wrong the first time, call (855) 382-3257 for a free estimate. We’ll put a level on it, tell you what it costs, and leave you a written number.
Written by Norm Castellano, Owner at Toolbox Contractors, serving Redwood City, Woodside Mr-Glass service, and the Peninsula.