Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Colma, CA | Toolbox Contractors
We provide independent Mr-Glass shower enclosure, glass, and window service across Colma, and the thing that sets our work here apart is simple: nearly every Mr-Glass enclosure in this ZIP fails the same way, because Colma’s fog-belt air keeps hinges damp and glass wet for months at a time. We’re Toolbox Contractors, led by Norm Castellano, and we service, repair, and replace Mr-Glass units from frameless shower doors to sliding enclosures, using OEM parts wherever they’re available and quality aftermarket hardware when they’re not. Call (855) 382-3257 for a free estimate, and we’ll tell you straight whether you’re looking at a repair or a replacement.
Why Colma Residents Choose Us for Mr-Glass Service
We’ve worked on Mr-Glass frameless shower doors, semi-frameless sliders, custom mirrors, and window glass throughout Colma long enough to know that this town’s damp air punishes glass hardware differently than anywhere else in San Mateo County. Norm Castellano grew up around houses that were always mid-project, went through the construction technology program at San Bernardino Valley College, and spent nearly two decades doing framing, roofing, and full gut-and-rebuilds before running Toolbox Contractors. That background matters when a Mr-Glass pivot hinge has seized solid and the client needs to know whether the panel is still good. We’re an independent contractor, not affiliated with or authorized by Mr-Glass, and our expertise comes from hands-on work in the field, not a manufacturer badge. We’re also a full-scope general contractor, which means the same crew that re-seals your shower wall channel can also handle the tile, grout, window, and even the roof work above it if the moisture problem goes deeper than the glass. One contractor, every phase. Mr-Glass sales & service is only part of what we do, but in Colma’s housing and commercial stock, it’s a part we see constantly.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Colma
- Fog-belt moisture intrusion degrading the sealant line on frameless Mr-Glass shower doors. Colma’s near-constant summer fog and damp air keep sealant beds wet longer than they should, so water wicks behind the panel and stains the tile and grout. When that happens, the fix is usually re-templating the panel, cutting a fresh seal, and re-setting the wall channel, not replacing the glass.
- Hard-water mineral etching and clouding on Mr-Glass shower glass. Damp air that never fully dries accelerates mineral spotting and film buildup on shower panels. A cloudy panel that won’t polish clear often needs replacement; we’ll tell you before we quote whether it’s restorable or done.
- Seized or corroded pivot hinges and roller glides on Mr-Glass sliding enclosures. Colma’s humidity and salt-laden air work on hinge pins and roller bearings year-round. We replace OEM hinge sets and glides where they’re available, and switch to quality aftermarket hardware only when OEM parts are discontinued or back-ordered.
- Out-of-square rough openings in older Colma structures racking Mr-Glass panels. Early-20th-century homes and older commercial buildings around here settle, so doors bind, hinges loosen, and seals fail early. We re-template panels to the actual opening rather than forcing a stock size into a frame that moved decades ago.
- Water damage behind the wall channel. Once a seal fails in Colma’s damp air, the studs behind the shower don’t dry out on their own. We open the wall when needed, repair the framing, and rebuild the wet area so the new Mr-Glass unit has something solid to hang on.
Mr-Glass Service in Colma: What Local Conditions Mean for Your Equipment
Roughly 70% of Colma’s land is cemetery, and that fact changes how even an interior shower or glass job gets sequenced around here. Any ground disturbance near burial plots can trigger archaeologically sensitive handling and coordination with cemetery operators, so a shower replacement that touches a slab or an exterior wall in Colma gets planned around plot-boundary and utility-line checks that no neighboring San Mateo County city requires. We learned this firsthand on a chapel-annex restroom refresh near the Serra Mortuary complex off Junipero Serra Blvd. Our crew pulled a fogged and etched Mr-Glass frameless shower door whose pivot hinge had seized solid from years of fog-belt humidity. We replaced the OEM hinge set, re-templated a fresh low-iron panel to the out-of-square opening, and re-sealed the wall channel so water stopped wicking behind the tile. That kind of damp-air corrosion shows up on nearly every enclosure in this ZIP, but the sequencing around cemetery ground rules is specific to Colma, and it’s a coordination layer most glass and shower contractors never plan for. Colma service area work always includes that overhead in our scheduling, because ignoring it stalls the job mid-pull.
Mr-Glass Models & Products We Service in Colma
We work on the Mr-Glass Frameless Shower Door Series, the Semi-Frameless Sliding Shower Enclosure, the Custom Mirror & Glass Partition line, and Standard Window & Door Glass Replacement units. For repairs, we use OEM Mr-Glass hardware and seal kits wherever they’re available for a clean fit and warranty-valid work, and we switch to quality aftermarket hinges, rollers, and gaskets only when OEM parts are discontinued or back-ordered. Our honest stance: a corroded hinge or worn seal is a repair; a cracked or fogged panel or a warped frame is a replacement. We keep common Mr-Glass hinge sets, roller glides, and seal kits stocked for faster Colma turnaround, and we order panel glass from local suppliers who cut low-iron stock to template in a few days rather than weeks.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Colma
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
A free estimate from us includes a look at the hinge wear, seal line, and opening square before we quote a number, so you know what you’re actually paying for. Call (855) 382-3257 and we’ll give you a written, line-item price.
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well, offering Home Remodeling in Colma. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Colma
That’s almost always the hardware, not the glass. In Colma’s humid, salt-laden air, OEM pivot hinges seize and corrode while the panel stays perfectly usable. We replace the hinge set and re-tension the door, and in most cases the glass goes right back on. Call (855) 382-3257 for an exact assessment and a repair quote.
Maybe, and the deciding factor is whether the clouding is mineral film on the surface or etching into the glass itself. Colma’s damp air keeps shower surfaces wet longer, which accelerates hard-water spotting and film buildup, but a panel that will not polish clear is etched and needs replacement. We’ll test it and tell you which one you’re looking at before we quote, so you don’t pay for a panel you don’t need. Call (855) 382-3257 and we’ll take a look.
Yes. Older Colma structures settle, and we template Mr-Glass panels to the actual opening rather than forcing a stock size into a frame that moved. We measure, shim, and re-template so the door swings clean and the seals don’t fail early. It’s standard practice for us on every pre-war and post-war building in this ZIP.
They can. Any work that touches a slab or exterior wall near burial plots may require coordination with cemetery operators and utility-line checks before we disturb anything, which adds a scheduling step most San Mateo County cities never see. We build that time into our General Contractor – Colma estimates so the job doesn’t stall mid-pull. Call (855) 382-3257 for a free estimate that accounts for it from the start.
We’re an independent contractor and not affiliated with or authorized by Mr-Glass. We use OEM Pacifica Mr-Glass service hardware and seal kits wherever they’re available specifically so repairs stay clean and warranty-valid, and we only switch to quality aftermarket parts when OEM stock is discontinued or back-ordered. If your enclosure is under a Mr-Glass warranty, we’ll tell you what that means for the repair before we start.
Service Areas Near Colma
We run Mr-Glass service from Colma into Daly City, Broadmoor, South San Francisco, San Bruno, and Pacifica. Mr-Glass service in Daly City gets a lot of the same fog-belt hinge corrosion we see in Colma. Mr-Glass service in Broadmoor follows the same damp-air playbook for out-of-square openings and sliding enclosure hardware.
Book Your Mr-Glass Service in Colma Today
Call (855) 382-3257 for a free estimate on Mr-Glass shower doors, enclosures, or glass replacement in Colma. We’ll tell you whether it’s a repair or a replacement, what it costs, and when we can get it done. Same-week scheduling is available for most shower and glass service calls in 94015.
Written by Norm Castellano, Owner at Toolbox Contractors, serving Colma and the San Mateo County fog belt.