Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Silver Lakes, CA | Toolbox Contractors
We provide independent Unilock paver, wall, and hardscape construction across Silver Lakes, CA (92342). No manufacturer affiliation, no showroom script. What makes our Unilock work different here comes down to one thing: we know how these units behave on wind-scoured, freeze-thaw-exposed high-desert ground, not just how they look on a pallet. If you’re planning a Unilock driveway, patio, or retaining wall in Silver Lakes, call (855) 382-3257 for a free estimate and we’ll tell you straight what the job needs.
Why Silver Lakes Residents Choose Us for Unilock Service
Most contractors in the high desert set Unilock pavers the same way they’d set them in Rancho Cucamonga or Fontana, unlike our Unilock in Adelanto approach. That’s the problem. Silver Lakes sits on the west edge of the Mojave, where spring winds sandblast exteriors and summer days swing 40 degrees from the morning low. Joint sand that holds fine in a tract-home backyard fails out here when the wind season hits. Norm Castellano, who runs Toolbox Contractors, grew up in Muscoy, went through the construction technology program at San Bernardino Valley College, and spent two decades untangling botched hardscape jobs across the Inland Empire. When a previous contractor’s paver field starts migrating toward the lake, we’re the crew that gets called to re-base it. We use genuine Unilock units, matching edge restraint, and polymeric joint sand, so the repaired field matches the existing courses. Call (855) 382-3257 and tell us what you’ve got, and we’ll tell you what it actually needs.
Styles & brands we work with







Common Unilock Construction Problems We Solve in Silver Lakes
- Joint sand loss and paver migration on windward driveways. Silver Lakes’ spring sandstorms scour polymeric sand straight out of Brussels Block joints. Once the sand goes, the units rock under tires, then shift. We lift the affected field, re-compact the sub-base, reset the pavers, and re-sand with the right polymer for high wind exposure.
- Efflorescence and salt bloom on Cambridge pavers. Winter nights below freezing pull moisture up through the bedding layer. On Cambridge Pavingstones with the ArmorTec finish, that leaves a white chalky bloom across the surface. It’s not a defect. It’s the high desert doing what it does. We clean it and can apply a breathable sealer if the homeowner wants the color locked in.
- Edge restraint failure at driveway aprons. Wind-driven sand undermines plastic edge restraints, and once the edge lets go, the whole field spreads. We see this constantly on lakefront properties in Silver Lakes where the wind comes off the water. The fix is pulling the perimeter, resetting the restraint on compacted base, and re-locking the field.
- Beacon Hill Flagstone surface spalling. Lakefront patios get damp, then freeze, then thaw, then get sandblasted. The top layer of the flagstone pops. We replace only the spalled units, not the whole patio, unless the field is beyond saving.
- Retaining wall leaning or bulging. Estate Wall blocks hold soil, but when the base was never properly compacted, the wall starts to lean after a few freeze-thaw cycles. We rebuild from the base up with proper drainage behind the wall, because a retaining wall in the high desert fails from the back, not the front.
Unilock Service in Silver Lakes: What Local Conditions Mean for Your Equipment
Here’s the thing nobody tells you until you live here: Silver Lakes’ HOA architectural review board has to approve any exterior hardscape change before the county permit issues. That means your Unilock driveway or patio job doesn’t start with a shovel. It starts with an ARB approval packet. We’ve done enough work in Silver Lakes to schedule every job with documented HOA sign-off in hand before we pull a single unit. We also time the work around the spring wind season. Trying to set pavers and sweep polymeric sand while 40-mile-per-hour gusts are blowing across the lake is a losing game. The sand won’t stay in the joints long enough to activate. So we book Silver Lakes hardscape work in the calmer windows and tell homeowners straight when the wind season makes waiting a month the smarter call. On a lakefront lot off the community’s west-edge streets, our crew pulled a settled Brussels Block driveway where the sand had washed out and the edge restraint had let go. We re-compacted the sub-base, reset the field with new Unilock edge restraint, re-sanded with polymeric sand, and had the HOA approval on record before the first unit came out. That’s not a generic Unilock service detail. That’s Silver Lakes reality.
Unilock Models & Products We Service in Silver Lakes
We install and repair the full Unilock residential line commonly specified in Silver Lakes: Brussels Block, Cambridge Pavingstones with ArmorTec finish, Beacon Hill Flagstone, and the Estate Wall retaining system. For repairs, we source genuine Unilock units and matching edge restraint so the field stays consistent. Where OEM spec isn’t required, we use quality aftermarket base aggregate and geotextile for the compacted sub-base. A settled or sand-starved paver field gets lifted, re-based, and re-sanded. Only cracked, spalled, or discontinued units get replaced outright. We don’t upsell a full tear-out when the problem is six inches of missing joint sand. If you’re comparing options, our Unilock sales & service page breaks down the full scope.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Silver Lakes
Here’s what Unilock work costs in the San Bernardino high-desert market, including Silver Lakes and nearby Unilock service in Victorville:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives the cost in Silver Lakes specifically is site access, sub-base condition, and whether the HOA architectural review has already been completed. A lakefront lot with a long paver driveway and wind-damaged edges costs more to re-base than a standard front apron. Every estimate we give is a written line-item quote. No change orders, no surprise add-ons. Call (855) 382-3257 and we’ll walk the site and put numbers on paper before you commit to anything.
Serving Silver Lakes, CA — Our Local Coverage Area
We’re based in the Silver Lakes area and know this community well, with Unilock in Mountain View Acres also in our service area. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Silver Lakes
Yes. Silver Lakes’ architectural review board must sign off on any exterior hardscape change before the county permit issues. We prepare and submit the ARB packet for you and don’t start work until the approval is documented. Call (855) 382-3257 if you want us to walk you through what the board looks for.
Spring windstorms across Silver Lakes scour polymeric sand from paver joints, especially on windward driveways near the lakes, similar to the Unilock repair in Spring Valley Lake conditions we handle. Once the sand goes, units rock and the field starts to migrate. The long-term fix is re-compacting the sub-base, resetting the field, and re-sanding with a high-wind-rated polymer. Call (855) 382-3257 for a free assessment of your driveway.
Unilock pavers handle the temperature swings fine. What the high desert tests is the installation: the sub-base has to be compacted correctly, or freeze-thaw cycles will shift the field within two or three winters. We build Silver Lakes paver jobs around that reality from day one. Call (855) 382-3257 to schedule a site walk.
Sealing is optional but worthwhile in Silver Lakes if you want to lock in color and slow the wind-driven surface wear. We recommend a breathable sealer, not a film-forming one that traps moisture and causes spalling. For a patio near the lake, sealing is the difference between pavers that fade and pavers that hold. Call (855) 382-3257 to talk options and pricing.
A paver driveway in Silver Lakes runs $7,000 to $18,000, depending on square footage and sub-base condition. A paver patio runs $3,500 to $11,000. HOA review and wind-season scheduling can affect timing but not the line-item price. Call (855) 382-3257 for an exact quote, free.
Service Areas Near Silver Lakes
We serve Silver Lakes and the surrounding high-desert and Inland Empire communities, including San Bernardino, Muscoy, Rialto, and Highland. Our team also handles Unilock work in Garnet and down toward Aliso Viejo. For the full coverage map, see our Silver Lakes service area page.
Book Your Unilock Service in Silver Lakes Today
Planning a Unilock driveway, patio, or retaining wall in Silver Lakes? Call (855) 382-3257 to schedule a free estimate. We’ll walk your site, check the HOA status, and tell you exactly what the job needs and what it costs.
Written by Norm Castellano, Owner at Toolbox Contractors, serving Silver Lakes and the greater Inland Empire.