Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Bernardino Homeowners Choose ES Windows Construction
We provide independent San Bernardino ES Windows service, handling everything from fogged dual-pane glass replacement in older vinyl single-hungs to full impact-rated window installations for foothill-edge homes facing windborne debris requirements. Our crew knows these units inside and out: how the vinyl frames react to sustained 100°F summer heat, why aluminum series windows from mid-century builds corrode faster here than on the coast, and which sliding door rollers actually hold up in our dust-heavy wind season. We’re not a manufacturer-authorized dealer, which means we give straight repair-versus-replace advice without any warranty-tie pressure. If you need ES Windows work done right in San Bernardino, call (855) 382-3257 for a free estimate.
Why Trust Toolbox Contractors for Your ES Windows Construction?
Norm Castellano grew up in Muscoy, just northwest of San Bernardino, and cut his teeth at San Bernardino Valley College’s construction technology program before spending nearly two decades on framing, roofing, and full interior remodels across the Inland Empire, where he now offers ES Windows service in Muscoy. He’s the guy you call when another contractor left a mess and someone has to untangle it before real work can start.
That’s why our ES Windows work is different. We don’t send out a salesperson with a script. We send people who have actually pulled ES Windows sashes apart, re-glued failed seals, replaced worn balance shoes, and reset sliders that jumped their tracks in a Santa Ana gust. We stock OEM-compatible parts locally, and when OEM isn’t available, we match profile and glass specs with aftermarket components that perform as well as the original. Our repair calls start with the frame: if the vinyl or aluminum is sound, we fix what’s broken. If it’s not, we tell you straight.
Styles & brands we work with







Common ES Windows Construction Problems We Fix in San Bernardino
- Fogged dual-pane glass from failed factory seals. ES Windows dual-pane units, especially those installed through the 1990s and early 2000s, lose their glazing seal over time. Inland San Bernardino heat accelerates this: the constant expansion and contraction of glass and sealant in 100°F-plus summers breaks down the seal years earlier than the same window would fail in a coastal climate. The symptom is condensation or haze between the panes that won’t wipe off. We replace the insulated glass unit (IGU) rather than the whole window whenever the sash and frame are still solid.
- Vinyl sash warping and sticking from sustained heat. Older ES Windows vinyl single-hung and double-hung units can warp slightly after years of direct sun exposure on west-facing San Bernardino walls. August afternoon sun on a stucco-over-frame house can push wall temperatures well past 120°F. Warped vinyl means sashes bind in the frame, weatherstripping tears, and air leaks open up. On some models, the issue is the balance shoe or channel, not the vinyl itself. We figure out which it is before quoting you anything.
- Aluminum frame corrosion and pitting on mid-century homes. San Bernardino’s downtown and older core have a lot of 1950s and 1960s homes with original ES Windows aluminum series frames. Fifty or sixty years of dust, occasional rain, and dry inland air takes a toll: frames pit, corners corrode, and the aluminum swells just enough to make operation difficult. If the frame is still structurally intact, we can often re-glaze, replace the weatherstripping, and extend the window’s life. If the extrusion is compromised, we’ll tell you to replace instead of sinking money into a dying frame.
- Sliding glass door rollers and tracks worn from dust and grit. Santa Ana winds push fine dust into every opening in a San Bernardino home. ES Windows sliding patio doors are particularly vulnerable: grit works its way into the roller bearings, the rollers wear down, and the door starts dragging, binding, or jumping the track. We replace rollers, clean and re-align tracks, and if the bottom rail is bent from someone forcing a stuck door, we address that too.
- Impact-rated glass delamination on foothill-edge homes. Homes along Waterman Avenue toward the mountains and neighborhoods backing the wildland-urban interface often have ES Windows impact-rated laminated glass for windborne debris protection. Over time, these laminated units can show edge delamination, a milky or cloudy band around the perimeter where the plastic interlayer separates from the glass. It’s not always a full failure, but it needs inspection before fire season when windows are your primary ember barrier.
ES Windows Parts & Our Repair-vs-Replace Approach
When ES Windows parts are available through OEM channels, we use them. That means genuine replacement sashes, balance shoes, rollers, and insulated glass units that match the original specs exactly. When ES Windows has discontinued a part, which happens with window lines manufactured 20 or 30 years ago, we source quality aftermarket components that match the frame profile and glass thickness. We don’t install whatever fits loosely and call it done.
The repair-versus-replace call is simple. If the vinyl or aluminum frame is square, structurally sound, and not soft from water intrusion, a sash swap, glass replacement, or roller change is usually the right spend. A $600 glass replacement on a 1998 double-hung beats a $700 window replacement when the frame has another decade left. If the frame is warped, corroded through, or leaking at the rough opening, we tell you that too, and we’ll give you a range for new ES Windows or another solid brand like PGT or CGI. Call (855) 382-3257 for an honest assessment, not a sales pitch.
Our ES Windows Service Process – Step by Step
- 1
Diagnosis. We inspect the full unit: frame, sash, glass, weatherstripping, and operation. We identify whether the problem is the glazing, the hardware, the frame, or the installation. For water leaks, we trace the path before assuming it’s a window problem at all. It’s often the flashing above, not the window itself.
- 2
Repair or installation. If it’s a repair, we order the correct ES Windows part or a properly matched aftermarket equivalent. If it’s a replacement, we measure the existing opening, order the new unit with the right glass package for San Bernardino’s climate zone (low-E, dual-pane, and impact-rated where required), and schedule removal and installation without leaving your home open overnight.
- 3
Testing. Every repaired or replaced window gets tested for smooth operation, a tight seal, and proper drainage. We check the weep holes are clear, because blocked weep holes are a common cause of window leaks that never shows in a showroom.
- 4
Warranty and follow-up. We stand behind our labor. If a part fails or an adjustment is needed after we leave, you call us and we come back. That’s the whole point of working with one local contractor instead of a rotating cast of subcontractors.
See the difference
Before
After
Before
After
Before
AfterES Windows Products We Service & Install in San Bernardino
We service and install ES Windows in Highland and surrounding areas, including vinyl single-hung and double-hung replacement windows, the aluminum series still found in mid-century San Bernardino homes, sliding glass doors and patio doors, and impact-rated laminated glass units for windborne debris zones on the foothill edge. We keep common rollers, balance shoes, and weatherstripping profiles stocked for faster turnaround on slider and sash repairs. For full replacements, we order per project so you get the right size, the right glass package, and the right frame color, not whatever’s been sitting in a warehouse.
We Also Service These Brands
ES Windows isn’t the only manufacturer we know. Our crew installs and services PGT, CGI, and Therma-Tru windows and doors, plus KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. One contractor for the window, the kitchen, and the roof: that’s how we work in San Bernardino.
FAQs – ES Windows Construction Service in San Bernardino
No. We’re an independent ES Windows service provider in San Bernardino, which means we repair and replace these windows without any manufacturer authorization or warranty tie. That independence works in your favor: our recommendation is based on what’s right for your home, not what satisfies a dealer agreement.
We use OEM ES Windows parts when they’re available, including replacement sashes, balance shoes, rollers, and insulated glass units. When ES Windows has discontinued a part for older models, we match the frame profile and glass specs with quality aftermarket components that perform equivalently. We’ll tell you exactly what we’re installing and why.
In most cases, you can replace just the insulated glass unit and keep your existing frames. If the vinyl or aluminum frame is still square and structurally sound on your San Bernardino home, an IGU swap clears up the fog and restores insulation at a fraction of full replacement cost. We’ll inspect the frame before recommending anything. Call (855) 382-3257 to schedule that inspection.
Usually it’s the rollers, but it can be both. Fine dust from Santa Ana wind events grinds down roller bearings over time, and the track collects grit that makes the door drag. We clean the track, check the rollers for flat spots, and replace what’s worn. If the door still binds after that, the frame may have settled out of square, which is a bigger conversation.
Older ES Windows vinyl frames can warp from sustained high heat, especially on west-facing walls that bake in August sun. Newer vinyl formulations and reinforced vinyl resist warping far better than early-generation products. If your frames are straight and the sashes move freely, keep them. If they’re binding or showing gaps at the weatherstripping, replacement may make more sense than repeated repairs.
Yes. Impact-rated ES Windows laminated glass units can be installed in existing homes, including older wood-frame and stucco-over-frame construction. For homes in the wildland-urban interface along the north foothills, impact-rated or Chapter 7A-compliant windows are often required for re-roof and major remodel projects. We’ll check your specific code zone before ordering glass.
We do. Window leaks are often misdiagnosed as glass or frame failures when the real culprit is roofing, flashing, or a failing header. Our full-scope crew handles roof repair as well as window work, so one team diagnoses and fixes the entire water path. Roof repair in San Bernardino typically runs $400 to $1,800, depending on the size of the repair.
Window replacement runs $4,500 to $15,000 depending on window count, frame condition, and glass package. Impact window installation runs $8,000 to $25,000 for a full home. Glass-only repairs are less. Here’s a breakdown:
| Service | San Bernardino Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Call (855) 382-3257 for an exact quote on your specific windows. Estimates are free.
Book Your ES Windows Service in San Bernardino, CA
If you need ES Windows repair in Loma Linda or nearby, and your windows are fogged, sticking, leaking, or simply tired, we’ll give you a straight answer on what they actually need. One contractor for the window, the flashing, and the roof above it: that’s Toolbox Contractors in San Bernardino. Call (855) 382-3257 to schedule your free estimate.
Written by Norm Castellano, Owner at Toolbox Contractors, serving San Bernardino and the Inland Empire.