Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Construction in Marin City, CA | Toolbox Contractors
We provide independent ES Windows construction and replacement service across Marin City, CA – installation, re-glazing, re-flashing, and frame repair on vinyl and aluminum units alike. What sets our work here apart is that we’re not reading a Marin City brochure; we’ve pulled enough fogged, salt-pitted ES sashes out of Marin City’s 1940s and 50s openings to know exactly what those frames do after ten damp winters. Call (855) 382-3257 for an independent assessment, whether that turns out to be a re-glaze or a full replacement.
Why Marin City Residents Choose Us for ES Windows Service
We’re a full-scope general contractor, which matters more in Marin City than people expect. Replacing an ES window on a hillside lot near the Headlands rarely stops at the window – it pulls in flashing, siding, sometimes a soft rim joist, and a county inspector who wants the whole rough opening to meet current fire-hardening detail. The same crew that sets and squares your ES unit can also re-side the adjacent wall in James Hardie plank, re-roof the dormer over it with GAF or CertainTeed materials, and handle the stucco repair so the envelope actually closes up. One contractor, every phase. Norm Castellano started out framing and roofing around San Bernardino, then spent two decades untangling the jobs where a previous contractor left a half-finished opening. That’s the exact skill set a Marin City homeowner needs when a 1950s window replacement turns into a reframe job.
We also treat ES Windows parts properly. Where the factory balancer, glazing, or weatherstrip is still available, we match it. Where it’s discontinued, we tell you that up front and use a quality aftermarket part instead of pretending otherwise. We’re an ES Windows service provider, not a factory-authorized dealer – independence means we recommend what actually fits your home and your county permit, not what protects a manufacturer’s margin.
Styles & brands we work with







Common ES Windows Construction Problems We Solve in Marin City
- Fogged insulated glass on fog-belt elevations. Marin City’s damp marine air and the daily temperature swing between wet mornings and sunnier afternoons beat up window seals. We see ES double-hungs where the glass unit failed in under a dozen years, leaving fog that won’t wipe off. We replace the insulated unit with factory-spec glazing and rebuild the seal so condensation stays out.
- Pitted, chalky ES aluminum frames with seized sliders. Salt-laden air off Richardson Bay and the Headlands corrodes aluminum faster than most homeowners realize. An ES aluminum slider that once moved with two fingers eventually needs a shoulder. We’ll clean, re-hang, and replace rollers where the frame’s sound, and say so plainly when corrosion has eaten the track enough that replacement is the better call.
- Water staining and soft framing around the rough opening. Moisture intrusion at the frame-to-rough-opening transition is the expensive one to ignore, because by the time you see a honey-colored drip line on the interior trim, the framing behind it may already be soft. The original 1940s and 50s flashings in this town’s Marinship-era housing were rarely sealed the way modern code expects, and patching the trim alone just buries the problem.
- Binding sashes and gaps at the meeting rail. On Marin City’s steep lots, slope creep and aging framing rack an opening over time. The window itself is still square – the rough opening isn’t. We re-square the installation, shim properly, and re-set the unit so an otherwise sound ES window closes flat again.
- Hardware that’s frozen or missing entirely. Thumb latches, crank operators on casements and awnings, lift rails – all of it takes a beating in salt air. We replace worn hardware with OEM or equivalent aftermarket parts, and where the window series is no longer produced, we machine-fit something comparable rather than leaving it to corrode again.
ES Windows Service in Marin City: What Local Conditions Mean for Your Equipment
Here’s the thing a generic window page won’t tell you: Marin City is unincorporated, so every exterior-envelope window replacement or addition is permitted and inspected through the Marin County Community Development Agency, never a city building department. That changes how a job is priced, how it’s sequenced, and how long it takes. A hillside lot up near the Headlands can trigger geotechnical, drainage, and fire-hardening conditions – defensible-space and ember-resistant eave details on a window opening that someone in flat ES Windows in Sausalito would never have to discuss with an inspector. On the creek-adjacent parcels the county keeps an even closer eye. So when we set an ES unit in Marin City, we’re not just flashing the sill pan. We’re re-flashing the perimeter to the county’s current detail, choosing the glazing and frame materials that hold up to salt air, and writing the permit scope so the inspection passes the first trip. That’s the difference between a cheap window bid and a replacement that’s actually legal to live with.
ES Windows Models & Products We Service in Marin City
We install and repair the full run of ES Windows product lines: vinyl single-hung and double-hung replacement series, aluminum sliding and fixed picture units, multi-slide and patio door systems, and casement and awning series. On the repair side we keep common factory-spec glazing beads, weatherstrip profiles, balances, and aftermarket roller assemblies on hand for the ES series most often found in Marin City’s mid-century tract homes, which shortens turnaround when the glass or hardware has failed. If a unit needs a part that’s back-ordered or no longer made, we tell you what the wait looks like and offer a quality aftermarket alternative right then. The decision to re-glaze and re-flash versus replace outright comes down to frame condition – once salt air has pitted an aluminum track, throwing a new sash at it just wastes money. If you need ES Windows sales & service, we’ll walk you through that honestly.
See the difference
Before
After
Before
After
Before
AfterES Windows Service Pricing in Marin City
What you’ll pay for ES Windows construction in Marin City depends on three things: how many units, whether the surrounding framing is sound, and how much the county’s fire-hardening or hillside requirements add to the scope. Below are our current Marin County ranges for the work most often tied to ES windows.
| Service | Typical Range (Marin City) |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
A Marin City window replacement runs toward the upper end when the rough opening needs re-framing, the county requires ember-resistant glazing and flashing details, or we’re also pulling siding and trim to close the envelope properly. Every estimate we give is line-item written, with the permit pulled and the inspection passed as part of the scope – no change order games. Call (855) 382-3257 and we’ll price your exact openings against what’s actually behind them.
Serving Marin City, CA — Our Local Coverage Area
We’re based in the Marin City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – ES Windows Construction in Marin City
You need a Marin County permit, not a city one, because Marin City is unincorporated. Any replacement that changes the exterior envelope – which means every full-frame ES window replacement and every addition – gets reviewed and inspected through the Marin County Community Development Agency. We pull the permit, schedule the inspection, and handle the fire-hardening and hillside documentation when the lot triggers it. Call (855) 382-3257 and we’ll tell you before we start what your specific parcel will need.
Marin City sits in a tighter fog pocket with more persistent damp than most of Sausalito, where ES Windows service in Belvedere faces similar marine conditions, and the daily cycling between wet, cold nights and dry sunny spells stresses an insulated glass seal until it lets go. Once moisture is between the panes, it can’t be wiped off. We re-glaze the sash with factory-spec insulated units and rebuild the seal so it doesn’t return in two years. For an exact cost on your slider, call (855) 382-3257 – the quote is free.
Sometimes. Light surface oxidation cleans off and can be re-finished, but deep pitting on a slider track or at the frame corners is corrosion you can’t buff back to strength. We’ll tell you which situation you have, and if the frame’s compromised, we won’t take your money for a repair that fails next winter. Call (855) 382-3257 and we’ll look at the frames before you decide anything.
It can. Marin County reviews hillside window work for drainage and fire-hardening compliance more closely than flatland parcels like ES Windows in Tiburon, and creek-adjacent lots get additional scrutiny on any exterior change. We’ve handled enough of these to know which ES window configurations and flashing details satisfy the county so the inspection passes the first time. Call (855) 382-3257 and we’ll check your parcel’s specifics.
Usually not. In a Marin City home on a slope, binding is often the rough opening going out of square as the ground and framing shift, not the ES unit failing. We re-square the opening, re-level the unit, and the sashes ride again. If the window is also leaking or fogged, we’ll tell you whether repair or replacement makes more sense. Call (855) 382-3257 for an assessment.
Service Areas Near Marin City
We run ES Windows construction crews throughout Marin County and the wider Bay Area corridor. Same crew, same independent approach, same line-item pricing. If you’re in Marin City service area, or in nearby San Bernardino County communities where our owner Norm Castellano started out – see ES Windows service in San Bernardino and ES Windows service in Colton – call for a local assessment.
Book Your ES Windows Service in Marin City Today
Tell me what you’ve got and I’ll tell you what it actually needs. Call (855) 382-3257 to schedule your free estimate in Marin City – we’ll walk your openings, check the frames and the flashing, and give you a written scope with a fixed price before any work starts.
Written by Norm Castellano, Owner at Toolbox Contractors, serving Marin City and Marin County since the day we first peeled a salt-pitted aluminum sash out of a postwar tract wall.