Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Felton, CA | Toolbox Contractors
Toolbox Contractors provides independent Mr-Glass installation and repair across Felton, from frameless shower enclosures to mirrored closet systems. What sets our Mr-Glass work apart here is simple: we set glass to out-of-level hillside walls that flatland contractors never account for. If you’re dealing with a leaking enclosure, binding rollers, or a shower that was never blocked properly behind the tile, call (855) 382-3257 for a free estimate.
Norm Castellano leads our crew, and he grew up around construction in the Muscoy area before studying at San Bernardino Valley College. We’ve spent years fitting Mr-Glass products into Felton homes, including the redwood-era cabins and slope-step remodels that dominate this stretch of the Santa Cruz Mountains. From Mr-Glass sales & service expertise to site-specific Felton knowledge, we bring both.
Why Felton Residents Choose Us for Mr-Glass Service
Most glass companies in this area are either Santa Cruz flatland operations or big-box subcontractors who show up, measure once, and assume every wall is plumb. Felton homes are different. A cabin on Zayante Drive with two additions layered over four decades has walls that drift, unlike the straighter builds where Mr-Glass service in Ben Lomond typically works. A hillside rebuild on Graham Hill Road has floors that slope. When we install a Mr-Glass frameless enclosure, we account for that before we order the glass. It changes how the pivot hangs, where the silicone lands, and whether the door swings true.
We’re independent. No manufacturer affiliation, no authorization implied. That independence means we tell you when a Mr-Glass frame is cracked beyond repair instead of selling you a third re-seal. We stock the seals, sweeps, rollers, and shims these units need for fast Felton turnaround, and we match OEM hardware on load-bearing parts where it matters. Norm’s crew is the one you call when a previous contractor left a shower leaking into the subfloor and you need the mess untangled before real work can start. Tell me what you’ve got and I’ll tell you what it actually needs.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Felton
- Frameless hinges pulling out of unblocked tile backer. We see this constantly in Felton remodels where a shower was added over decades without proper blocking behind the substrate. The hinge looks fine until it doesn’t. We re-block, re-set, and re-secure the door to load-bearing framing, not drywall or tile alone.
- Sliding door rollers flattening on packed mountain grit. Redwood duff, construction dust from hillside work, and everyday dirt from gravel driveways build up in bottom tracks. Rollers bind, flatten, and start dragging. We swap in matched Mr-Glass rollers and adjust the track so the door glides.
- Silicone seals wicking water behind the curb. Felton’s seasonal slab and pier movement is real. Winter rains saturate hillsides, and older homes flex. A seal that looked tight in August opens hairline gaps by January. We repair the curb assembly, not just the caulk line.
- Low-iron glass etching from mineral-heavy water. Felton’s well and spring sources carry calcium and magnesium that spot and eventually etch unprotected glass. We can restore some panels and advise on sealing and maintenance for new Mr-Glass installations.
- Out-of-plumb walls throwing off frameless panel alignment. On a Mount Hermon slope remodel, our crew tore out a leaking Mr-Glass semi-frameless enclosure and found the wall out of plumb by nearly an inch. We re-blocked, re-set the pan on a slack slope for drainage, and installed a new frameless pivot unit that sealed properly heading into winter rains.
Mr-Glass Service in Felton: What Local Conditions Mean for Your Equipment
Here’s what flatland installers miss: Felton’s stepped hillside foundations and pier-and-beam redwood-era cabins mean almost nothing is level. On Zayante and Graham Hill slopes, a glass shower enclosure has to be set to a floor that drops a quarter inch over three feet and a wall that leans a half inch out of true. A plumb-and-level assumption works in Scotts Valley. It fails here. We’ve watched enclosures installed by outside crews develop hinge stress cracks within a year because the pivot was hung square to a wall that wasn’t. We set glass to the building as it actually sits, then shim and seal so the door operates correctly for the life of the unit. That’s the difference between a shower that stays dry and one that rots the curb before you notice.
Mr-Glass Models & Products We Service in Felton
We install and repair the full Mr-Glass range: frameless shower enclosures in 10mm tempered glass with pivot and sliding hardware, custom sliding shower doors in low-iron glass, semi-frameless bi-fold shower systems, and mirrored or glass closet and wardrobe door systems. On load-bearing hinges, pivots, and rollers, we match OEM Mr-Glass hardware and glass specs. For seals, sweeps, and bumpers, we use quality aftermarket parts where they outperform OEM. Our service van carries the common Felton sizes and hardware, so most repairs happen in one visit without waiting on a parts order.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Felton
What you’ll pay depends on the unit, the condition of the rough opening, and whether we’re repairing or replacing. Here are our current ranges for the shower and bath work we do most often in Felton:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
A free estimate includes measuring the opening, checking the wall and floor for level, and a written line-item quote so you know what’s labor, what’s materials, and what’s the glass itself. Call (855) 382-3257 to schedule yours. Most Felton estimates take under an hour.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Felton
Yes. The key is setting the enclosure to the actual wall and floor conditions, not assuming plumb. We shim, block, and adjust so the pivot hangs correctly and the seals land where they need to. Most out-of-level Felton bathrooms take a frameless unit fine once the rough opening is corrected. Call (855) 382-3257 and we’ll measure yours.
Yes. We match OEM Mr-Glass hinges, pivots, and rollers for load-bearing parts, and we keep common sizes in stock for fast Felton service. If the hardware is discontinued, we’ll source a compatible replacement and tell you what’s OEM versus aftermarket before we install it.
For interior glass and mirrored installations, wildfire zoning rarely changes the product itself. What it changes is the venting, sealing, and any exterior glazing if the project touches the building envelope. We work alongside the roofing and siding side of our business to make sure any exterior work meets CAL FIRE defensible-space and WUI requirements for Felton homes and nearby Mr-Glass service in Lompico properties.
We can restore lightly etched low-iron panels, and for new Mr-Glass installations we recommend a glass sealant and a squeegee routine that slows spotting dramatically. The mineral load in Felton water is high enough that untreated glass will etch over time. We’ll walk you through what to use and how often. Call (855) 382-3257 for a recommendation specific to your water source.
Usually yes. The limiting factors are the existing pan, the condition of the subfloor, and whether the framing behind the surround is sound. We’ve converted dozens of Felton cabins from tired surrounds to open Mr-Glass walk-ins, and the result gives an older mountain home a brighter, more modern feel, similar to the Mr-Glass service in Mount Hermon homes we work on. A free estimate tells you what’s involved. Call (855) 382-3257 to schedule one.
Service Areas Near Felton
Beyond Felton, our crew covers the San Lorenzo Valley and surrounding areas regularly. We work in the Felton service area, plus Mr-Glass service in Lexington Hills and Mr-Glass service in Communications Hill. We also take calls from Ben Lomond, Boulder Creek, and Mount Hermon.
Book Your Mr-Glass Service in Felton Today
If your Mr-Glass enclosure is leaking, binding, or just doesn’t hang right on your Felton hillside, call (855) 382-3257. We’ll schedule a free estimate, measure the actual conditions, and give you a written quote before any work starts. Most repairs can be scheduled within a few days.
Written by Norm Castellano, Owner at Toolbox Contractors, serving Felton and the San Lorenzo Valley.