Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Felton, CA | Toolbox Contractors
We provide independent PGT window and door service across Felton, CA (95018), from redwood-era cabins on Zayante to newer builds above Mount Hermon. What makes our PGT work here different is simple: we plan every repair and replacement around Felton’s wildfire exposure and saturated hillside drainage, not just the glass. If your PGT slider or window is failing, call (855) 382-3257 for a straight diagnosis and a free estimate.
Why Felton Residents Choose Us for PGT Service
We’ve spent years pulling PGT units apart and putting them back together across the Santa Cruz Mountains, so we know how these windows and doors actually age in Felton. Not in a showroom. Not in Scotts Valley. Here, where winter rain pounds the south- and west-facing glazing and summer ember exposure works the same frames from the other direction. We’re an independent contractor, not affiliated with or authorized by PGT, which means our recommendation comes from what we see on your house, not from a manufacturer’s sales script. Norm Castellano grew up around houses that were always mid-project, and he built Toolbox Contractors on the idea that one accountable contractor should handle the full scope, from the roof to the windows to the deck door. Tell me what you’ve got and I’ll tell you what it actually needs.
Styles & brands we work with
Common PGT Construction Problems We Solve in Felton
- IGU seal failure and fogging. Heavy winter rain followed by summer heat cycling works the desiccant inside insulated glass units hard. On Felton hillside homes with little tree cover to buffer the southern exposure, we see PGT WinGuard and vinyl units fog between the panes years earlier than the same glass would in a shaded Santa Cruz lot.
- Sliding-door roller and track wear. On cabins where the PGT slider is the main access to a deck, grit tracked in from Zayante-area driveways chews rollers to flat spots. Wind-driven needle drop and debris fill the sill track, and the door starts dragging, then sticks, then refuses to close square against the weatherstripping.
- Frame and weatherstripping deterioration under smoke and ember exposure. This one is a Felton-specific concern. Ember intrusion through degraded seals on an older PGT unit is a real wildland-urban interface hazard, not a flatland worry. We check frame seals and defensible-space clearance around every opening we service here.
- Corner weld separation and water intrusion at rough openings. Stepped hillside foundations move with saturated slopes. When the ground swells and settles seasonally, openings rack and corner welds on older PGT frames crack. We see this most often on homes where the original flashing was done to flatland assumptions.
- Fogged glass on newer rebuilds. It happens on brand-new PGT units too, and the cause in Felton is often installation-related. When an opening isn’t flashed and drained properly for a steep-slope home, water sits against the glazing channel and eventually gets pulled into the IGU. We re-flash and re-drain the opening, not just swap the sash.
PGT Service in Felton: What Local Conditions Mean for Your Equipment
PGT units on Felton’s Mount Hermon and Zayante slopes get a double test that flatland Santa Cruz or Scotts Valley homes don’t. Winter storm-driven rain pushes hard against south- and west-facing glazing on exposed ridgelines, saturating the ground around stepped foundations and racking openings. Then summer wildfire smoke and ember exposure work the same frames, degrading weatherstripping and testing every seal that winter already stressed. On burn-scar and saturated hillside streets, we check flashing, drainage, and defensible-space clearance around every opening, not just the glass itself. A PGT window that performs fine in a valley subdivision will fail differently on a hillside above Mount Hermon, and the fix has to account for that or you’ll be calling us back in two years for the same fogged IGU.
PGT Models & Products We Service in Felton
We service the PGT WinGuard Impact Series, the PGT Aluminum Series including thermally broken sliders, and the Premium Vinyl and vinyl single-hung lines. For every unit we open up, our approach is the same: use OEM PGT replacement rollers, weatherstripping, and glazing components where they’re still available, and source quality aftermarket IGUs and hardware when a unit is out of production. We stock common PGT roller assemblies and weatherstripping profiles for fast turnaround in Felton rather than waiting on backordered factory parts. Because we’re an independent PGT sales & service provider, we’re not limited to whatever a manufacturer program says we can install. If your 20-year-old PGT slider still has a sound frame, we’ll fix it. If the frame has given up to Felton’s weather, we’ll tell you plainly and quote a replacement.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Felton
What you’ll pay depends on what failed and how far it’s gone. A fogged IGU is a glazing replacement. A dragging slider might just need rollers, or it might need a full assembly with a new sill and flashing. Here’s what our PGT-related work in Felton typically runs:
| Service | Typical Range in Felton |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Every estimate includes a written line-item scope. No vague allowances. Call (855) 382-3257 and we’ll come out, look at the unit, check the opening, and give you a number you can plan around.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Felton
PGT WinGuard impact units are rated for windborne debris, but they also give a Felton home a tighter envelope against ember intrusion, which matters more for wildfire hardening in the wildland-urban interface than the impact rating itself. The key is that the frame, weatherstripping, and the rough opening flashing all have to be intact, and on older units that’s exactly what fails first on hillside lots. If you’re in a defensible-space review and an inspector flags glazed openings, call (855) 382-3257 and we’ll assess what’s worth repairing versus replacing.
OEM PGT parts when they’re still made for your unit, and quality aftermarket components when the line is discontinued and the factory no longer supplies it. For a PGT slider that’s still in production, OEM rollers and weatherstripping are usually available and worth the wait. For a 20-year-old unit, you may not have an OEM option at all, and in those cases we source aftermarket hardware that actually fits rather than rigging something that half-works. Either way, you’ll know exactly what’s going into the door before we start.
A roller and track rebuild on a PGT slider is typically a same-visit repair if the frame is sound and we have the parts on hand. Replacing a fogged IGU usually takes a few days to a week since the glass panel has to be ordered to your specific window dimensions. A full PGT replacement on a hillside opening, with re-flashing and drainage correction, usually runs a two- to three-day installation window once materials arrive. Weather on Ben Lomond and the mountain can push exterior work, especially in winter, and we’ll build that into the schedule honestly.
WinGuard Impact Series, the Aluminum Series including thermally broken sliders, and the Premium Vinyl single-hung and slider lines. If you have a different PGT product, call us anyway. We’ll identify the line from the AAMA sticker or the frame profile, and if it’s not something we can service, we’ll say so on the phone before you book anything.
Window replacement here typically runs $4,500 to $15,000, impact window installation $8,000 to $25,000, and roof repair tied to flashing or leak issues around those openings $400 to $1,800. Hillside access, second-story work, and defensible-space corrections can push a project toward the top of those ranges. Call (855) 382-3257 for an exact quote, estimates are free.
Service Areas Near Felton
We serve Felton and the surrounding mountain communities, including Felton service area neighborhoods off Graham Hill Road, Zayante, and Mount Hermon. We also take PGT work in PGT service in Lexington Hills and PGT service in Communications Hill, where the same hillside drainage and fire-hardening realities apply.
Book Your PGT Service in Felton Today
If your PGT window is fogged, your slider drags, or a building inspection flagged a glazed opening, don’t wait for the next storm or fire season. Call Toolbox Contractors at (855) 382-3257, describe what you’ve got, and we’ll tell you what it actually needs.
Written by Norm Castellano, Owner at Toolbox Contractors, serving Felton and the Santa Cruz Mountains.