Unilock Construction in Fontana, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Unilock Construction in Fontana, CA | Toolbox Contractors

We install and rebuild Unilock paver systems across Fontana, and the one thing that sets our work here apart is knowing how mid-century tract-lot subgrade and Cajon Pass wind loading behave together. That pairing decides whether a paver driveway or patio stays locked for a decade or starts creeping within two seasons. We’re an independent installer, not manufacturer-authorized or endorsed by Unilock, and we’d rather tell you that up front than let you find out after a failed repair. Call us at (855) 382-3257 for a straight answer on your existing Unilock field or a new paver driveway, patio, or concrete replacement project.

Why Fontana Residents Choose Us for Unilock Service

Norm Castellano grew up in Muscoy, just northwest of San Bernardino, and he’s spent the better part of two decades untangling contractor messes across the Inland Empire before real work could even begin. That’s how he built Toolbox Contractors, a full-scope general contractor crew that handles everything from paver driveways and patios to kitchens, roofs, and ADUs. What that means for your Unilock project in Fontana is simple: we diagnose paver problems against the actual conditions of your lot and street, not against a manufacturer brochure.

We’ve rebuilt Unilock Brussels Block driveways off Sierra Avenue, re-laid Beacon Hill patios in 92337 subdivisions, and re-sanded more front walks than we care to count after Santa Ana wind events stripped the joints bare. Because we work with 50+ vetted material brands across every phase of a project, Unilock fits into a bigger picture for us, not a one-trade lane. Need a paver patio tied into a new retaining wall? We’ll sequence it with the Seneca Valley wall system and compact the base once, not piecemeal it across three separate contractors.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common Unilock Construction Problems We Solve in Fontana

  • Polymeric joint sand blowing free on driveway aprons and front walks. Santa Ana wind funnels down the Cajon Pass and hits the older tract streets in 92335 and 92336 hard. Joints open up, then fill with windblown dust and weeds. We re-sand with Unilock-compatible polymeric sand and reset the edge restraint so the field can’t drift again.
  • Edge restraint failure on driveways. Expansive Inland Empire soil works origininal spikes loose over one or two wet-dry cycles, and the paver field starts creeping at the driveway-to-garage transition. We remove the damaged restraint, reset the curbing, and in most Fontana lots that means digging deeper than the original base allowed.
  • Efflorescence and sun-chalking on lighter pavers. Fontana’s summer heat sits north of 100°F for weeks, and hard local irrigation water leaves a white bloom that plain rinsing won’t touch. We treat the surface and correct the drainage that feeds the mineral deposit, so it doesn’t just reappear next irrigation cycle.
  • Settlement and rutting in paver patios and driveways. Kaiser-era tract lots built in the 1950s through 1970s were graded with inconsistent fill. Where original concrete was overlaid, the base depth was often cut short. That means a Brussels Block driveway that looks fine after install can develop wheel ruts within two years.
  • Faded or chalking pavers that still have structurally sound bases. Not every paver needs to come out. If the base is solid and the jointing is intact, surface restoration and re-sanding is the honest move. We’ll tell you when replacement is the better money.

Unilock Service in Fontana: What Local Conditions Mean for Your Equipment

Here’s the thing nobody tells you about Unilock work in Fontana, and it’s the difference between an install that lasts and one that heaves in three years. The tract lots that dominate 92335 and 92336 were graded and built fast for the Kaiser Steel mill workforce in the 1950s through 1970s, and a lot of those original builders left shallow, inconsistently compacted fill beneath the driveway and patio slabs. Modern Unilock installation assumes a properly compacted subgrade. On a 1960s single-story stucco tract home off Sierra Avenue, our crew pulled a heaved and creeping Brussels Block driveway where the original edge restraint had let go in the expansive soil. We excavated to a deeper compacted base, reset the curbing and re-laid the field, then re-sanded with polymeric joint sand so the wind funneling down the Cajon Pass can’t strip the joints again. That’s what “done right” means in Fontana: accounting for the lot’s history before you lay the first paver. A newer 92337 subdivision usually needs far less base work than the older streets do, and we price the difference honestly.

Unilock Models & Products We Service in Fontana

We work with the Unilock product lines you actually see on Fontana driveways and patios: Brussels Block, Brussels Dimensional, Beacon Hill, and the Seneca Valley retaining wall system. When we repair or rebuild, we match Unilock’s own paver profiles and their proprietary edge restraint and joint-sand systems rather than substituting generic sand or plastic edging. Compatibility is what keeps the field locked after a wind event, and we’ve seen enough generic substitutes fail in one season to stop using them entirely. We’re an independent Unilock service provider, which means we source what your specific project needs and stock common profiles locally for faster Fontana turnaround. If your section of pavers has a profile we can’t match quickly, we’ll tell you before we start, not halfway through.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Unilock Service Pricing in Fontana

What drives the cost most in Fontana isn’t the paver itself, it’s the lot underneath. Older 92335 and 92336 tract lots nearly always need more base excavation and re-compaction than newer 92337 subdivisions, because the original fill was inconsistent. Here’s what you can expect:

Service Price Range
Paver Driveway Installation $7,000 – $18,000
Paver Patio Installation $3,500 – $11,000
Concrete Driveway Installation $4,500 – $12,000
Driveway Replacement $5,000 – $14,000

A free estimate from us includes walking the lot, checking the existing base if you have one, and telling you what repair actually makes sense versus what’s just buying one more season. Call (855) 382-3257 for an exact quote.

Serving Fontana, CA — Our Local Coverage Area

We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Unilock Construction in Fontana

Service Areas Near Fontana

We serve Fontana and the surrounding Inland Empire communities, including San Bernardino, Colton, Muscoy, Rialto, and Highland. If your property is in an adjacent neighborhood or an unincorporated pocket, call (855) 382-3257 and we’ll confirm coverage. We also provide Unilock service in Crestline and Unilock service in Mentone for customers in those communities. And for a broader look at what we do across the region, see our Fontana service area page or our main Unilock sales & service overview.

Book Your Unilock Service in Fontana Today

If your Unilock driveway is creeping, your patio is settling, or your joints keep opening up after every Santa Ana event, call us. We’ll walk the lot, tell you what it actually needs, and give you a free written estimate. Call (855) 382-3257 to schedule yours.

Written by Norm Castellano, Owner at Toolbox Contractors, serving Fontana and the surrounding Inland Empire. Tell me what you’ve got and I’ll tell you what it actually needs.

Need Construction help in Fontana? Licensed & insured · Free on-site estimates response · free estimates
Call (855) 382-3257
Areas We Serve

Request a Free Estimate in Fontana

Tell us what you need — Toolbox Contractors responds fast. No obligation.

By providing your information above, you confirm you have read our Privacy Policy and authorize us to contact you by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch