Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Redwood City, CA | Toolbox Contractors
We provide independent Tremron paver and wall installation, resetting, and drainage repair across Redwood City. What sets our Tremron work apart here is the lot itself: most jobs happen on small infill parcels where the driveway is the only staging area and every inch of base prep has to account for winter storm runoff. That changes how we schedule, how we grade, and how we source Tremron units. Call (855) 382-3257 for a free estimate on paver driveways, patios, retaining walls, and hardscape tied to additions or ADU builds.
Why Redwood City Residents Choose Us for Tremron Service
We have set Tremron pavers and Stonegate wall block on Redwood City’s small lots long enough to know the difference between a paver that failed because the unit was bad and a paver that failed because the base was never re-graded for Peninsula drainage. Most of what we fix is the second kind. Norm Castellano, who runs Toolbox Contractors, came up doing residential framing and roofing across the Inland Empire before moving into full-scope remodeling and hardscape. He is the guy you call when a previous contractor left a mess that needs untangling before real work can start. Redwood City homeowners use us because we stock Tremron-compatible units and matching edge restraint locally, we pull permits when the scope triggers them, and we do not pretend a paver swap will fix a base that has been settling for twenty years. You get a crew that has been through enough Peninsula winter cycles to know where water actually goes on a flat infill lot.
Styles & brands we work with
Common Tremron Construction Problems We Solve in Redwood City
- Joint sand washed out after winter storms. Redwood City gets almost no rain from May through September, then everything arrives in waves between October and April. A shallow base with thin joint sand holds fine through the dry season and then fails in one storm cycle. Pavers shift, cup at driveway aprons, and the edges start wandering. We remove, re-grade, re-compact, and re-set with Tremron units and polymeric joint sand that survives the rainy window.
- Efflorescence on shaded wall block. Peninsula fog and shade-side patios keep Tremron Bristol Valley and Metro wall block damp for weeks in winter. That slow moisture draw leaves white mineral streaking across the faces. We clean it, address the drainage behind the wall that is feeding the moisture, and set the block with proper geotextile and drainage aggregate so it stops recurring.
- Edge restraint creep where the driveway meets an old apron. Many 1940s-60s ranch homes in the 94061 and 94063 neighborhoods still have their original concrete apron. Contractors overlay Tremron pavers without pulling the old slab, and within two years the pavers migrate toward the street. We tear out the failing concrete first, re-grade the subgrade, then set the paver field with fresh edge restraint.
- Ponding at the low corner of a patio. On small Redwood City lots, the patio often sits within a few feet of a shared property line. If runoff was never pitched away from that line, the low corner ponds and the pavers settle. We fix the pitch, add subsurface drainage where the lot requires it, and re-set the field so water moves toward the street or a dry well rather than the neighbor’s foundation.
- Settlement from skipped base work on tight infill lots. When the driveway is the only material staging area, some crews rush the base because there is nowhere to put spoils. We plan the base prep around that single access point before demolition starts, not after, so the compacted base actually gets compacted and the pavers stay flat.
Tremron Service in Redwood City: What Local Conditions Mean for Your Equipment
If you live near the El Camino corridor or downtown, you already know the drill: your lot is small, your driveway is shared or barely wide enough for one truck, and Redwood City’s planning rules mean most hardscape work is tied to infill, not fresh subdivisions. The local angle is sequencing. On a tight lot, the driveway is the only place a pallet of Tremron Olde Charleston pavers can land, the only place a mini-excavator can sit, and the only place spoils can leave. That means before demolition we map the drop point, schedule the pallet delivery around the tear-out so materials do not sit blocking the shared access, and coordinate with Redwood City on any pre-application meetings if the paver scope ties to an ADU or a second-story addition. Most crews think about this after the old patio is already in a pile. By then the neighbor has called. We plan the sequencing first, and that is why our Redwood City Tremron installs stay on schedule and stay flat through the rainy season.
Tremron Models & Products We Service in Redwood City
We install and repair Tremron Stonegate segmental retaining wall block, Olde Charleston and Town Hall paver lines, and the European Fan and Cambridge Cobble patterns. For walls we work with Bristol Valley and Metro block. On visible and structural surfaces we use Tremron-manufactured units and matching edge restraint. On joint sand and geotextile we go aftermarket where the higher-spec product outperforms the basics; we stock both locally so Redwood City turnarounds do not wait on a distributor in San Jose. If the problem is a failing base, we say so plainly and re-set the base. A paver swap without base work just means you call us again in two years. You can see the full range of what we handle at Tremron sales & service.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Redwood City
What you pay depends on three things: whether we are pulling an old concrete slab, how much base re-grading the drainage needs, and whether the paver scope ties into an addition or ADU foundation. A straight paver driveway on a prepared base sits at the lower end of the range. A full tear-out, re-grade, and re-set on an old 1950s apron sits at the upper end. Every free estimate includes a written line-item quote with the paver count, base depth, and drainage plan called out separately, so you can see exactly what you are paying for.
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
Want an exact number for your Redwood City lot? Call (855) 382-3257 and we will walk the site and price it down to the paver.
Serving Redwood City, CA — Our Local Coverage Area
We’re based in the Redwood City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Redwood City
Yes. We typically stage the paver pallets on the street or in a tight corner of the front setback, tear out the old surface, and pull spoils in a single truck-load cycle so the shared driveway stays clear for the neighbor. The key is scheduling the drop and the haul-off before demolition starts. Call (855) 382-3257 and we will map the access plan at the free estimate.
In most cases, no. A straight paver patio or driveway overlay on an existing base with no drainage changes typically does not trigger a Redwood City permit. But if we are re-grading runoff, tying into an addition or ADU foundation, or altering grade near a shared property line, the scope may need planning sign-off. We check before we dig. Our service area covers the full Redwood City service area, including the infill lots where design review tends to come up.
Settlement after rain almost always means the base failed, not the paver. Redwood City’s October-April storm cycle saturates a shallow or poorly compacted base, the subgrade softens, and the pavers cup or sink. The fix is removing the field, re-compacting the base with proper aggregate, and re-setting the Tremron units. We do not patch settling pavers. We fix the base once and set the pavers so they stay flat.
We pitch the paver surface away from the property line, usually a minimum 1% fall, and add a french drain or channel drain where the lot slope will not carry water to the street naturally. On the tight 94061 and 94063 lots near downtown this often means grading toward a catch basin at the street side. The alternative is ponding at the low corner and a slow settlement problem that gets worse every winter.
Yes, and we do it often. Tremron pavers hold up well as a walkway or small patio next to a new ADU, and they handle the compacting and drainage demands of Redwood City’s infill lots better than a single concrete pour when access is too tight for a pumper. We have installed Tremron hardscape alongside prefab ADU builds and garage conversions across the 94062 and 94065 hillside pockets. If you are planning an ADU and the hardscape access is tight, call (855) 382-3257. Tell me what you’ve got and we’ll tell you what it actually needs.
Service Areas Near Redwood City
We serve Redwood City plus the surrounding Peninsula and Bay Area communities, including Tremron service in Emerald Lake Hills and Tremron service in San Carlos. If you are just outside those areas, call anyway. If the lot is small and the driveway is shared, we have probably worked one like it.
Book Your Tremron Service in Redwood City Today
Whether it is a full Tremron paver driveway replacement on a postwar ranch or a patio reset before the next rain season, we will walk the lot, price it honestly, and schedule around your access. Call (855) 382-3257 to schedule your free estimate.
Written by Norm Castellano, Owner at Toolbox Contractors, serving Redwood City and the greater Bay Area.